Spesifikasi
Koil Aluminium gulung kadhemen JINDALAI wis rampung kanthi presisi kanggo cocog karo standar internasional.Padha duwe wangun apik, toleransi dhuwur, versatility lan lumahing tanpa cacad.Iki digunakake ing aplikasi teknik komersial lan umum kayata badan bis, cladding lan bilah kipas.Perusahaan kasebut nyukupi panjaluk pelanggan sing terus berkembang kanthi upgrade terus-terusan lan perbaikan proses.
Wesi umum
| ukuran | |||
| Parameter | Range | Standar | Toleransi |
| Ketebalan (mm) | 0.1 - 4.0 | - | kanggo 0,16 kanggo 0,29 +/- 0,01 |
| kanggo 0,30 kanggo 0,71 +/-0,05 | |||
| kanggo 0,72 kanggo 1,40 +/-0,08 | |||
| kanggo 1,41 kanggo 2,00 +/-0,11 | |||
| kanggo 2,01 kanggo 4,00 +/-0,12 | |||
| Jembar (mm) | 50 — 1620 | 914, 1219, 1525 | Koil irisan: +2, -0 |
| ID (mm) | 508, 203 | - | - |
| Kapadhetan kumparan (kg/mm) | 6 maks | - | - |
| Koil embossed uga kasedhiya ing sawetara kekandelan 0,30 - 1,10 mm. | |||
| Sifat mekanik | |||||||
| Paduan (AA) | Temper | UTS (mpa) | %E (min) (ukuran 50 mm) | ||||
| Min | Maks | ||||||
| 0,50 - 0,80 mm | 0,80 - 1,30 mm | 1.30 - 2.6 0mm | 2,60 - 4,00 mm | ||||
| 1050 | O | 55 | 95 | 22 | 25 | 29 | 30 |
| 1050 | H14 | 95 | 125 | 4 | 5 | 6 | 6 |
| 1050 | H18 | 125 | - | 3 | 3 | 4 | 4 |
| 1070 | O | - | 95 | 27 | 27 | 29 | 34 |
| 1070 | H14 | 95 | 120 | 4 | 5 | 6 | 7 |
| 1070 | H18 | 120 | - | 3 | 3 | 4 | 4 |
| 1200, 1100 | O | 70 | 110 | 20 | 25 | 29 | 30 |
| 1200, 1100 | H14 | 105 | 140 | 3 | 4 | 5 | 5 |
| 1200, 1100 | H16 | 125 | 150 | 2 | 3 | 4 | 4 |
| 1200, 1100 | H18 | 140 | - | 2 | 2 | 3 | 3 |
| 3103, 3003 | O | 90 | 130 | 20 | 23 | 24 | 24 |
| 3103, 3003 | H14 | 130 | 180 | 3 | 4 | 5 | 5 |
| 3103, 3003 | H16 | 150 | 195 | 2 | 3 | 4 | 4 |
| 3103, 3003 | H18 | 170 | - | 2 | 2 | 3 | 3 |
| 3105 | O | 95 | 145 | 14 | 14 | 15 | 16 |
| 3105 | H14 | 150 | 200 | 4 | 4 | 5 | 5 |
| 3105 | H16 | 175 | 215 | 2 | 2 | 3 | 4 |
| 3105 | H18 | 195 | - | 1 | 1 | 1 | 2 |
| 8011 | O | 85 | 120 | 20 | 23 | 25 | 30 |
| 8011 | H14 | 125 | 160 | 3 | 4 | 5 | 5 |
| 8011 | H16 | 150 | 180 | 2 | 3 | 4 | 4 |
| 8011 | H18 | 175 | - | 2 | 2 | 3 | 3 |
| Komposisi kimia | ||||||
| Paduan (%) | AA 1050 | AA 1200 | AA 3003 | AA 3103 | AA 3105 | AA 8011 |
| Fe | 0.40 | 1.00 | 0.70 | 0.70 | 0.70 | 0.60 - 1.00 |
| Si | 0.25 | (Fe + Si) | 0.60 | 0.50 | 0.6 | 0,50 - 0,90 |
| Mg | - | - | - | 0.30 | 0,20 - 0,80 | 0.05 |
| Mn | 0.05 | 0.05 | 1.0 - 1.50 | 0,9 - 1,50 | 0.30 - 0.80 | 0.20 |
| Cu | 0.05 | 0.05 | 0,05 - 0,20 | 0.10 | 0.30 | 0.10 |
| Zn | 0.05 | 0.10 | 0.10 | 0.20 | 0.25 | 0.20 |
| Ti | 0.03 | 0.05 | 0.1 (Ti + Zr) | 0.1 (Ti + Zr) | 0.10 | 0.08 |
| Cr | - | - | - | 0.10 | 0.10 | 0.05 |
| Saben (saben) | 0.03 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
| Total (liyane) | - | 0.125 | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | 99.50 | 99 | Sisa | Sisa | Sisa | Sisa |
| Nomer siji nuduhake isi maksimum | ||||||
Wesi kuwat
| ukuran | ||
| Parameter | Range | Toleransi |
| Ketebalan (mm) | 0.3 - 2.00 | kanggo 0,30 kanggo 0,71 +/-0,05 |
| kanggo 0,72 kanggo 1,4 +/-0,08 | ||
| kanggo 1,41 kanggo 2,00 +/-0,11 | ||
| Jembar (mm) | 50 — 1250 | Koil irisan: +2, -0 |
| ID (mm) | 203, 305, 406 kanggo kekandelan <0,71 | - |
| 406, 508 kanggo kekandelan> 0,71 | ||
| Kapadhetan (kg/mm) | 3,5 maks | - |
| Sifat mekanik | ||||
| Paduan (AA) | Temper | UTS (mpa) | %E (min) (ukuran 50 mm) | |
| Min | Maks | |||
| 3004 | O | 150 | 200 | 10 |
| 3004 | H32 | 193 | 240 | 1 |
| 3004 | H34 | 220 | 260 | 1 |
| 3004 | H36 | 240 | 280 | 1 |
| 3004 | H38 | 260 | - | 1 |
| 5005 | O | 103 | 144 | 12 |
| 5005 | H32 | 117 | 158 | 3 |
| 5005 | H34 | 137 | 180 | 2 |
| 5005 | H36 | 158 | 200 | 1 |
| 5005 | H38 | 180 | - | 1 |
| 5052 | O | 170 | 210 | 14 |
| 5052 | H32 | 210 | 260 | 4 |
| 5052 | H34 | 230 | 280 | 3 |
| 5052 | H36 | 255 | 300 | 2 |
| 5052 | H38 | 268 | - | 2 |
| 5251 | O | 160 | 200 | 13 |
| 5251 | H32 | 190 | 230 | 3 |
| 5251 | H34 | 210 | 250 | 3 |
| 5251 | H36 | 230 | 270 | 3 |
| 5251 | H38 | 255 | - | 2 |
| Komposisi kimia | ||||
| Paduan (%) | AA 3004 | AA 5005 | AA 5052 | AA 5251 |
| Fe | 0.70 | 0.70 | 0.40 | 0.50 |
| Si | 0.30 | 0.30 | 0.25 | 0.40 |
| Mg | 0.80 - 1.30 | 0.50 - 1.10 | 2.20 - 2.80 | 1.80 - 2.40 |
| Mn | 1.00 - 1.50 | 0.20 | 0.10 | 0.10 - 0.50 |
| Cu | 0.25 | 0.20 | 0.10 | 0.15 |
| Zn | 0.25 | 0.25 | 0.10 | 0.15 |
| Ti | - | - | - | 0.15 |
| Cr | - | 0.10 | 0,15 - 0,35 | 0.15 |
| Saben (Liyane) | 0.05 | 0.05 | 0.05 | 0.05 |
| Total (Liyane) | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | Sisa | Sisa | Sisa | Sisa |
| Nomer siji nuduhake isi maksimum | ||||
Packing
Kumparan dikempalken ing posisi mripat-kanggo-langit utawa mripat-kanggo-tembok, dibungkus HDPE lan hardboard, diikat nganggo wesi gelung lan dilebokake ing palet kayu.Proteksi kelembapan diwenehake dening paket gel silika.
Aplikasi
● kabin bis lan awak
● Isolasi
● Cladding ing bangunan, panel komposit aluminium, langit-langit palsu lan paneling (koil polos utawa dilapisi warna)
● Busbar ducting listrik, fleksibel, trafo strip, etc
Gambar Detail
